Sheeran LOOPER X - (6.2.2) MIDI Clock Send

50
(6.2.2) MIDI Clock Send
Sheeran Looper X can send MIDI clock and MIDI start/stop messages to an external MIDI device (e.g., a
drum machine) while recording, overdubbing, and playing your loops in Multi, Sync and Band modes.
Sheeran Looper X can also send MIDI clock from a device connected to the traditional 5-pin MIDI Output,
or from a class compliant device connected to the USB Type-A Port on the rear panel.
You can enable or disable the MIDI Clock Sync feature, as well as set the MIDI Clock Destination, in the
(5.10) Menu > Global Settings menu.
Tip: Sending MIDI Clock works best when using properly cut loops. Loops that are miscut or have odd or
uncommon bar lengths may not work properly or cause unexpected results.