EasyManuals Logo

SHERCO TY 125 4T User Manual

SHERCO TY 125 4T
Go to English
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
43
ENGLISH
43
Prop-stand
The prop-stand is located behind the right-hand
footrest.
It is tted with a spring to aid in folding.
During the folding operation it can be damaged.
The stand will fold by itself after passing the half
way point.
NEVER travel with the prop stand down.
Unfold the prop stand onto at and rm surfaces.
ATTENTION
WARNING
- Check that your SHERCO Dealer has provided you with all the documentation.
- Make sure you have read and understood the instructions set out in the user manual provided.
- Make a note of the chassis, engine and key numbers in this user manual (page 36).
- Adjust the control instruments as required.
- Check the quantity of fuel.
- Check that the tyres are in good condition (Condition of the tyres Sect.)
- Check that the drive chain is in good condition (Adjusting the chain tension Sect.)
- Check that the braking system is in good condition and working properly (discs, front brake
lever and rear brake pedal).
- Check the condition of the clutch lever.
- Check that the headlight, turn indicators, sidelight and horn are working properly.
Instructions for the rst start-up

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SHERCO TY 125 4T and is the answer not in the manual?

SHERCO TY 125 4T Specifications

General IconGeneral
BrandSHERCO
ModelTY 125 4T
CategoryMotorcycle
LanguageEnglish

Related product manuals