5050
Changing the turn indicator bulb
- Turn the bulb holder to the left.
- Press the bulb in and turn it to the left.
- Pull the bulb out to remove it.
Type of bulb: 12v 35/35W
Retting:
- To ret, proceed in reverse order to removal.
Deposit the “old” bulb where it can be recycled.
This operation should be performed with the ignition
off.
Removal:
- Remove the screw located at the rear.
- Press the bulb in and turn it to the left.
- Pull the bulb out to remove it.
Bulb type: 12V R10W
Reassembly:
- Reverse the disassembly.
When mainting, place the pens auge correctly.
Put the used bulb in a suitable place for recycling.
WARNING
ATTENTION
Maintenance processes
TIP
TIP
C
D
A
B
C
A
B
D
D
To Next Page
Loading...
Need help?
General
