61
ENGLISH
61
Removing and reinstalling front wheel
Place the motorcycle in an upright position and
immobilise it at the rear.
To remove the front wheel:
- Remove the bolt from the right fork.
-
Remove the wheel shaft .
To ret the front wheel:
- Proceed in reverse order to the removal.
During the process do not press the brake lever. If
the lever has been pressed, the callipers will have
to be pushed back to make them re-separate.
If necessary, rell with brake uid and bleed the
corresponding circuit.
Take care when inserting the wheel to ensure that the
disc is not damaged by the brake pads.
Once everything is tted, check the correct brake
operation before riding the machine.
WARNING
WARNING
TIP
B
A
B
A
To Next Page
Loading...
Need help?
General
