5858
Adjusting the shock absorber
Condition of the brake discs
The wear on the thickness of the discs is produced
in the area of contact between the disc and the
brake pads.
Avoid riding the machine if the wearing area is not
greater than 2.7 mm.
ATTENTION
Maintenance processes
Spring compression:
The ring is used to adjust and set the position in
order to change the preload on the spring.
- Toothed and threaded ring .
Turn to the right for:
MORE PRESSURE.
Turn to the left for:
LESS PRESSURE.
A
A
To Next Page
Loading...
Need help?
General
