4444
Running the engine in
Starting the engine from cold
Starting the engine when warm
The TY125 4-stroke’s engine has been constructed
with an absolute precision so that the parts have
correct tolerances and surfaces.
Nevertheless, SHERCO recommends running the
engine gently, without forcing it, for the rst 1,000
kilometres.
To start the engine from cold, perform the following
steps:
- Switch on the ignition.
- Make sure the gear lever is in Neutral position (N).
- Turn on the choke (Choke chapter).
- Turn the fuel tap to the ON position.
- Start the engine (either electrically or mechanically).
- Turn off the choke (after a maximum of 1 km).
Avoid running with the choke ON.
After covering a distance of approximately 1 km,
turn it OFF.
To start the engine when warm, perform the
following steps:
- Switch on the ignition.
- Make sure the gear lever is in Neutral position (N).
- Check that the choke is OFF (Choke chapter).
- Turn the fuel tap to the ON position.
- Start the engine.
Riding instructions
TIP
WARNING
A
A
A
A
To Next Page
Loading...
Need help?
General
