Shimadzu CTO-40C CL User Manual

n Calibrating the first-point temperature《TEMP1 CALIB》
This function is not used in the CL model.
Recalibration operation is executed by service personnel.
Runs the 1st-point temperature calibration.
n Calibrating the second-point temperature《TEMP2 CALIB》
This function is not used in the CL model.
Recalibration operation is executed by service personnel.
Runs the 2nd-point temperature
calibration.
n Setting the estimated replacement time of the rotor seals of the automatic column
switch valves《VALVE1 ROTOR》《VALVE2 ROTOR》
Sets the estimated replacement time of the
rotor seals of the automatic column switch
valves installed.
Input the value with the numeric keypad
and press [Enter].
[VALVE1] indicates the valve installed on the left part of the instrument and [VALVE2] the
one installed on the right part.
When an automatic column switch valve is not installed, the panel does not display the
corresponding data.
n Setting the estimated replacement time of the stator seals of the automatic column
switch valves《VALVE1 STATOR》《VALVE2 STATOR》
Sets the estimated replacement time of the
stator seals of the automatic column
switch valves installed.
Input the value with the numeric keypad
and press [Enter].
CTO-40C CL
41
3.5 VP Functions Screen
3

Shimadzu CTO-40C CL Specifications

General

Brand	Shimadzu
Model	CTO-40C CL
Category	Oven
Language	English