1111411111111.„.i111111B
ii11111911111111!EIIIIIM
1111111111111111111111111Nliall
４ INSTALLATION AND MAINTENANCE/INSPECTION
ＭＵＸ-１００ SERVICE MANUAL ４ - １９
5. Connect the power supply cable which is included in CXDI-50G between Power Box
and DC/AC converter. (Refer to Fig. 4-23.)
6. Connect the LAN cable between Power Box and the PC.
7. Fix the Power Box on the Mount Plate, then fix it with the fixing plate. (Remove the four
rubber spacer which are attached on the bottom of Power Box , and turn on the Line
ON switch of Power Box before fixing it to the main frame of MUX-100D.)
8. Fix the cables to Power Box with the Cord Bracket. (Refer to Fig. 4-24.)
Fig.4-23 Fixing and Wiring of Power Box
Fig.4-24 Fixing the cables of Power Box
9. Remote Switch which is included in CXDI-50G is not used.
10. Turn on the main circuit breaker.
Power supply cable for
CXDI-50G
Power Bo
Fixture
Power Box for
CXDI-50G
DC/AC
converter
Power Box
Mount Plate
PC for
CXDI-50G
Fixing Plate
for PC
Cord Bracket
LAN cable
PC
To Next Page
Loading...
Need help?
General
