Shini Group
Technology & Marketing Dept
Issued by department: Date: Language: Document Name: Revision: Page:
Shini/CSC-TM
2013-11 zh-cn Shini product repair manual.doc
1.0 59 (62)
Catalog:
template:Standard_CN.dot; filename: Shini product repair manual; Printdate: 8/1/2014 1:58:00 PM; savedate: 8/1/2014 1:58:00 PM
2) Remove the front seal, check for damage and other problem, and mount the
bearing on seal position, as shown in the figure below.
Pic 20-2
3) Flatten into place with tooling, use tina water moistened cloth clean the seal
surface, as shown in the figure below.
Pic 20-3
To Next Page
Loading...
