149
SEA
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1. Open the already stored RC and press button 5 (as in the
picture) and release.
2. Within 18 seconds press the button of the new RC you want
to memorise.
If the two buttons of the already working RC are stored in the CU
in the new RC, both buttons will be memorised.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
HEAD 2 868 ROLL
Cod. 6901208
HEAD 4 868 ROLL
Cod. 6901209
Do not confuse with the aesthetically identical model but fix code.
This has dip switches inside.
Compatible with the 868 dual smart RC
868.35 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
To Next Page
Loading...