159
PEARL
Cod. 6901890
Compatible with 4026 TX 03-868-2, 4026 TX 03-868-4 RCs
WARNING: old models are not compatible with CUs
SOMMER
To enable a new RC it is necessary to intervene directly on the
receiving card to access the programming buttons.
1. Press and release the programming button (called PROG. or
MEMO). LED on the receiver will light up.
2. Press the new RC button (to be coded). LED on the receiver
will light up steadily.
3. Repeat the process for as many buttons as you want to
program. If the process is not successful or if errors are
made during programming, wait 20 seconds and start the
programming process again from point 1.
868.35 MHz
Rolling code 128 BIT
To Next Page
Loading...