167
TELCOMA
DUPLICABLE THROUGH UNIVERSAL RCs
1. Press and hold button 2 (top right) of the new RC (to be
encoded) and simultaneously press button 1 (top left) of the
new RC 4 times.
2. Release only button 1 (top left): LED of the new RC (to be
coded) will flash slowly.
3. Press and hold the button you want to duplicate on the
RC already working in receiver: LED of the new RC (to be
encoded) will light up steadily.
4. Release button 2 (top right): LED of the new RC (to be
coded) will start flashing quickly.
5. In the new RC (to be encoded) press the button where you
want to memorise the new code and release the button
only when LED of the new RC (to be encoded) is lit steady.
6. Move closer to the receiver and press the button of the
fresh programmed RC until the automation is activated.
EDGE 2E
Cod. 6900951
EDGE 4E
Cod. 6904210
433.92 MHz
Fix code
DUPLICABILE CON I RADIOCOMANDI UNIVERSALI
EVO
LITE
OLD RC
new new newnewnew new
1 2 3 4 5 6
To Next Page
Loading...