85
S449 MURALE
Cod. 6901998
CARDIN
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1. Use a pin to press the hidden button of the operating RC:
release the button at the short sound emitted by the CU.
2. Instantly press the button on the operating RC unit: the CU
will emit another short sound.
3. Press the button on the new RC that you want to encode:
the CU will emit 2 consecutive sounds.
4. After releasing the button, the CU will emit a longer sound
than the previous ones. Wait at least 10 seconds and try to
open the gate with the fresh programmed RC. To duplicate
further RCs repeat the operation starting from point 1.
433.92 MHz
Rolling code FM
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
To Next Page
Loading...