SICK Advanced Series

To Next Page

To Previous Page

Operating Instructions

CLV490 Bar Code Scanner

Figures and tables

Fig. 10-21: CLV490-3010/-3011 (High density): Min. and Max. reading

distance (measured radially) as a function of the focus position at a

resolution of 0.35 mm (13.8 mil) and an aperture angle of

α =40° .......10-23

Fig. 10-22: CLV490-3010/-3011 (High density): Min. and Max. reading

distance (measured radially) as a function of the focus position at a

resolution of 0.35 mm (13.8 mil) and an aperture angle of

α =50° .......10-24

Fig. 10-23: Characteristics field CLV490-3010/-3011 (High density): Scanning

frequency as a function of the radial reading distance and resolution......10-25

Fig. 10-24: CLV490-3010/-3011 (High density): Deflection range as a function

of radial reading distance, deflection angle and resolution ............................10-26

Fig. 10-25: CLV490-6010/-6011 (Low density): Reading field height as a function

of the reading distance and the tilt at a resolution of 0.5 mm (19.7 mil). 10-27

Fig. 10-26: CLV490-6010/-6011 (Low density): Min. and Max. reading

distance (measured radially) as a function of the focus position at a

resolution of 0.5 mm (19.7 mil) and an aperture angle of

α =40° ..........10-28

Fig. 10-27: CLV490-6010/-6011 (Low density): Min. and Max. reading

distance (measured radially) as a function of the focus position at a

resolution of 0.5 mm (19.7 mil) and an aperture angle of

α =60° ..........10-29

Fig. 10-28: Characteristics field CLV490-6010/-6011 (Low density): Scanning

frequency as a function of the radial reading distance and resolution......10-30

Fig. 10-29: CLV490-7010/-7011 (Low density): Reading field height as a

function of the reading distance and tilt at a resolution of 0.5 mm

(19.7 mil)............................................................................................................................10-31

Fig. 10-30: Characteristics field CLV490-7010/-7011 (Low density): Scanning

frequency as a function of the radial reading distance and resolution......10-32

Fig. 10-31: CLV490-7010/-7011 (Low density): Deflection range as a function

of radial reading distance, deflection angle and tilt at a resolution of

0.5 mm (19.7 mil) .......................................................................................................... 10-33

Fig. 10-32: External parameter memory, installed on the CLV490....................................10-34

Fig. 10-33: CLV-Setup: "Device configuration" tab with the CLV490 start options ..... 10-36

Fig. 10-34: CLV-Setup: dialog box for adjusting the external parameter memory ....... 10-38

Fig. 10-35: CLV490 with heater: temperature curve inside the housing.........................10-40

Fig. 10-36: CLV-Setup: Result display of the AutoBaud Detect function.......................... 10-47

Fig. 10-37: User interface of the "CLV-Setup" software.........................................................10-48

Fig. 10-38: CLV-Setup: entering commands in the Terminal Emulator.............................10-53

Fig. 10-39: Line scanner: calculating the number of scans for ladder-type

bar code arrangements................................................................................................10-55

Fig. 10-40: Line scanner: calculating the number of scans for fence-type

bar code arrangements................................................................................................10-55

Fig. 10-41: Line scanner with oscillating mirror: calculating the number of

scans for fence-type bar code positioning............................................................ 10-56

Fig. 10-42: One-Shot: Line scanner with oscillating mirror: calculating the

number of scans for fence-type bar code positioning......................................10-57

Fig. 10-43: Required distance between the bar codes on an object................................10-58

Fig. 10-44: Parameterization example: prepare a sketch of the reading situation ...... 10-61

Fig. 10-45: Parameterization example: settings on the "Reading Configuration" tab . 10-62

Fig. 10-46: Parameterization example: "Autofocus Parameters" tab................................10-63

Fig. 10-47: Parameterization example: "Autofocus Limits" tab ...........................................10-63

Fig. 10-48: Parameterization example: "Autofocus Optimizations" tab ............................10-64

Fig. 10-49: Parameterization example: Buttons on the "Device Configuration" tab.... 10-65

Fig. 10-50: Parameterization example: "Scanner Position Parameters" tab..................10-65

Fig. 10-51: Parameterization example: Settings on the "Device Configuration" tab ...10-66

Fig. 10-52: Parameterization example: settings on the "Code Configuration" tab.......10-67

Fig. 10-53: Parameterization example: "2/5 Interleaved" tab............................................. 10-67

Fig. 10-54: Parameterization example: "Host interface" tab (default setting) ............... 10-68

Fig. 10-55: Parameterization example: "Data Strings" tab (default setting)...................10-68

Fig. 10-56: Auxiliary input via the auxiliary interface of the CLV490 .................................. 10-69

WWW.100Y.COM.TW WWW.100Y.COM.TW WWW.100Y.COM.TW

Main Page

SICK Advanced Series

Table of Contents

Related product manuals