Name: SICK Advanced Series
Brand: SICK
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Operating Instructions Chapter 3

CLV490 Bar Code Scanner

Product description

14. For connection of the CLV490 to the CAN Scanner Network: the Operating Instructions

“Application of the CAN interface“ (no. 8009180, English edition).

CLV490 with heater The following are required to start up and operate the CLV490 with heater:

1. A SICK Connection Module to provide the power supply for the CLV490 (24 V DC

+20 %/–10 %) and connect the data and function interfaces. Available types:

– CDM490-0001 (no. 1025363) for 10 to 30 V DC, enclosure rating max. IP 65

– or –

Alternatively, a non-SICK Power pack with a voltage output of 24 V DC +20 %/–10 %

(functional extra-low voltage pursuant to IEC 364-4-41) and a minimum power output

of 100 W.

Cable no. 2020264 (3 m (9.84 ft)) with 15-pin D Sub HD connector and one open end

for connecting the CLV490 to the non-SICK Power pack (supply voltage).

2. The following operating voltages/power output values:

– CDM490-0001: 24 V DC +20 %/–10 % (pursuant to IEC 364-4-41), min. 100 W

Note The CMP490 Power Supply Module (output max. 25 W) is not suitable to provide the power

supply for the CLV490 with heater.

3. See pos. 3 under CLV490 without heater

3.1.4 Product features and functions (overview)

High-performance laser scanner:

• Line scanner (front-end reading window)

• Scanner variant with oscillating mirror (side reading window)

• Resolution variants: standard density, high density, low density

• Dynamic focus or autofocus

• Alternatively dynamic focus control with external or internal trigger

• Reading range 500 to 2,100 mm (19.7 to 82.7 in) (line scanner, standard density)

• Resolution 0.25 to 1.0 mm (9.8 to 39.4 mil) (standard density)

• Scanning/decoding frequency 600 to 1,200 Hz

• Reading range can strongly be limited (3-dimensional reading space)

Safety and user-friendly features:

• Robust, compact metal housing, max. IP 65, CE certification

• Laser class 2, laser diode switches off if reading interval is active for too long and if the

output power is exceeded

• Automatic self-test on startup. Can also be triggered at any time

• Diagnosis tools for installing and monitoring the system

• Parameterized output of reading diagnosis data in reading mode

• Operating data query, and error messages

• Test string function for signaling readiness for operation

• Future proof thanks to firmware update via serial interface (flash PROM)

• Low power consumption, other voltage range

Easy operation/configuration:

• With "CLV-Setup" PC software for Windows

• Alternatively with simple command strings, also for use with special devices

Light Source	LED, visible red light (660 nm)
Protection Class	IP65
Typical Scan Rate	500 scans/s
Ambient Operating Temperature	0 °C ... +50 °C
Power Supply	10 V DC ... 30 V DC

SICK Advanced Series User Manual

Table of Contents

Questions and Answers:

SICK Advanced Series Specifications

Related product manuals