Operating Instructions Chapter 3
CLV62x Bar Code Scanner
Quick-Start
8011965/S345/2008-04-16 © SICK AG · Division Auto Ident · Germany · All rights reserved 19
Optimise the reading conditions:
If no reading result is displayed or if you wish to increase the code reading reliability, the
reading can be repeated by taking the following measures.
¾ Install the bar code scanner in such a way that the bar code scanner's light meets the
idle object (code) at a 15° angle (skew).
¾ Correct or optimise the parameter values where necessary via the SOPAS-ET configura-
tion software.
To Next Page
Loading...
