Chapter 11 Operating Instructions
CLV62x Bar Code Scanner
96 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011965/S345/2008-04-16
Appendix
11.6 Supplementary documentation
Tab. 11-10: Supplementary documentation
Order no. Title Language Contents
8012119 Operating instructions "Connection module CDB620“ German/
English
Description of the wiring for the bar code scan-
ner with the host/PLC/sensor using connec-
tion module CDB620
8010004 Operating instructions "Connection module CDM420-
0001“
German/
English
Description of the wiring for the bar code scan-
ner with the host/PLC/sensor using connec-
tion module CDM420
8011155 Operating instructions "Connection module CDM420-
0004“
German/
English
Description of the wiring for two bar code
scanners with the host/PLC/sensor using con-
nection module CDM420
8012120 Operating instructions "Parameter memory module
CMC600“
German/
English
Description of operating the module in con-
nection module CDB620 or CDM420
8010372 Operating instructions "Display module CMD400“ German/
English
Description of operating the module in con-
nection module CDM420
8010365 Operating instructions "Power supply module CMP400“ German/
English
Description of installing the module in connec-
tion module CDM420
8010601 Operating instructions "Power supply module CMP490“ German/
English
Description of installing the module in connec-
tion module CDM420
8010461 Operating instructions "Field bus gateway CMF400-
1x01 for Profibus-DP“
German Description of installing and operating (config-
uring) the module in connection module
CDM420
8010463 Operating instructions "Field bus gateway CMF400-
2101 for DeviceNet“
German Description of installing and operating (config-
uring) the module in connection module
CDM420
8012213 Operating instruction "Field bus module CDF600-0100
for PROFIBUS-DP"
German Description of installation, operation and con-
figuration
8009179 Operating instructions "Use of the CAN interface" German Description of setting up a CAN scanner net-
work (electrical connection, configuring the
bar code scanner, functions) and integrating it
in a CAN open network