7 Commissioning
7.1 Starting SOPASair
Overview
SOPASair is used for operation, parameterization, and servicing purposes (e.g., diagnos‐
tics, data logger).
Prerequisites
•
Computer with Ethernet connection
•
Device is connected to the computer via Ethernet.
•
Voltage supply is connected.
•
Computer and device are located on the same network.
•
Computer and device have different IP addresses.
•
Access data
Rights Password
Read Can be accessed without a password
Read and write Default password: servicelevel
Approach
1. Open web browser (recommendation: Google Chrome).
2. Enter the device IP address into the address line.
Default IP addresses:
°
P1 and P2: 192.168.1.1
°
P3: 192.168.0.1
✓
The user interface is displayed.
3. To make changes, log in to the device.
7.2 Password management
7.2.1 Password assignment
Overview
Reading the parameter settings is possible without a password. A password can be
assigned to protect the product against unauthorized changes to the settings.
Prerequisites
•
When assigning a password for the first time, ensure the connection is secure, e.g.
by using a point-to-point connection to the device.
Approach
1. Establish a connection to the product in the web browser.
2.
Select:
3. Log in with the default password servicelevel.
✓
You will be prompted to assign a new password.
4. Assign a new password.
✓
The new password is valid immediately.
5. Log in again with the newly assigned password.
COMMISSIONING 7
8027859/1INN/2023-03-08 | SICK O P E R A T I N G I N S T R U C T I O N S | Lector85x
31
Subject to change without notice
To Next Page
Loading...
Need help?
General
