SICK Lector85x User Manual

8 Maintenance
8.1 Maintenance plan
During operation, the device works maintenance-free.
NOTE
No maintenance is required to ensure compliance with the laser class.
NOTE
No maintenance is required to ensure compliance with the LED risk group.
Depending on the assignment location, the following preventive maintenance tasks
may be required for the device at regular intervals:
Table 2: Maintenance plan
Maintenance work Interval To be carried out
by
Check device and connecting cables
for damage at regular intervals.
Depends on ambient conditions and
climate.
Specialist
Clean housing and viewing window. Depends on ambient conditions and
climate.
Specialist
Check the screw connections and
plug connectors.
Depends on the place of use, ambi‐
ent conditions or operating require‐
ments. Recommended: At least every
6 months.
Specialist
Check that all unused connections
are sealed with protective caps.
Depends on ambient conditions and
climate. Recommended: At least
every 6 months.
Specialist
8.2 Cleaning
Cleaning includes the viewing window and the housing of the device.
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
■
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
Cleaning the viewing window
Check the viewing window of the device for accumulated dirt at regular intervals.
This is especially important in harsh operating environments (dust, abrasion, damp,
fingerprints, etc.).
The viewing window lens must be kept clean and dry during operation.
NOTE
Static charging may cause dust particles to stick to the viewing window. This effect can
be reduced by using an anti-static cleaning agent in combination with the SICK lens
cloth (part number 4003353).
8 MAINTENANCE
36
O P E R A T I N G I N S T R U C T I O N S | Lector85x 8027859/1INN/2023-03-08 | SICK
Subject to change without notice

SICK Lector85x Specifications

General

Brand	SICK
Model	Lector85x
Category	Measuring Instruments
Language	English