SICK Lector85x User Manual

7.7 Saving the parameter set
Overview
The device is configured for the application using SOPASair. The parameter set can
be permanently saved in SOPASair. To be able to restore the parameter set to a
replacement device, for example in the event of a device failure, you should also save
the parameter set externally.
Approach
1. Permanently saving the parameters in SOPASair:
✓
The device stores the parameter set internally in the permanent parameter mem‐
ory.
✓
If a memory card is installed in the device, the device also saves the parameter
set externally on the memory card.
2. Open SOPASET.
3. In SOPASET, manually save the parameter set as a project file on the computer.
✓
The parameter set is also saved externally. The parameter set in the project file
can be transferred to a replacement device via download.
7.8 Installing firmware updates
Prerequisites
•
Computer with the SICK AppManager software installed
The current version of SICK AppManager can be downloaded from www.sick.com/
SICK_AppManager. To install SICK AppManager, open the installation file (*.exe)
and follow the instructions on the screen.
•
Ethernet connection
Procedure
1. Open SICKAppManager.
2. Drag and drop the file into the Firmware window.
3. In the Firmware window, select the file to be installed.
4. In the bottom right window, click the Install button.
✓
The firmware update is installed.
COMMISSIONING 7
8027859/1INN/2023-03-08 | SICK O P E R A T I N G I N S T R U C T I O N S | Lector85x
35
Subject to change without notice

SICK Lector85x Specifications

General

Brand	SICK
Model	Lector85x
Category	Measuring Instruments
Language	English