SICK TiM361S

2.6 Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training.
Improper handling of the device may result in considerable personal injury and material
damage.
■
All work must only ever be carried out by the stipulated persons.
Project planning
For project planning, a person is considered qualified when he/she has expertise and
experience in the selection and use of protective devices on machines in the respective
area of application, and is familiar with the relevant technical rules and national work
safety regulations.
Mechanical mounting
For mechanical mounting, a person is considered qualified when he/she has the exper‐
tise and experience in the relevant field and is sufficiently familiar with the use of the
protective device on machines in the respective area of application to be able to assess
whether it is in an operationally safe state.
Electrical installation
For electrical installation, a person is considered qualified when he/she has the exper‐
tise and experience in the relevant field and is sufficiently familiar with the use of the
protective device on machines in the respective area of application to be able to assess
whether it is in an operationally safe state.
Configuration
For configuration, a person is considered qualified when he/she has the expertise and
experience in the relevant field and is sufficiently familiar with the use of the protective
device on machines in the respective area of application to be able to assess whether it
is in an operationally safe state.
Commissioning
For commissioning, a person is considered qualified when he/she has the expertise
and experience in the relevant field and is sufficiently familiar with the use of the
protective device on machines in the respective area of application to be able to assess
whether it is in an operationally safe state.
Operation and maintenance
For operation and maintenance, a person is considered qualified when he/she has the
expertise and experience in the relevant field, is sufficiently familiar with the use of
the protective device on machines in the respective area of application, and has been
instructed by the operating entity of the machine in the details of operation.
An operator may clean the device and carry out specific thorough checks as instructed.
Regular thorough checks
For these regular thorough checks, a person is considered qualified when he/she has
the expertise and experience in the relevant field and is sufficiently familiar with the
use of the protective device on machines in the respective area of application to be
able to assess whether it is in an operationally safe state.
2 SAFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N S | TiM361S 8022483/1LM2/2024-03-27 | SICK
Subject to change without notice