SICK TiM361S

Variant TiM361S
Power consumption 4W (typical), with unloaded digital outputs, incl. start-up current
Max. 16W with 4 loaded digital outputs
Input voltage Low: V
in
≤ 2V; I
in
≤ 0.3mA
High: 8V ≤ V
in
≤ 32V; 0.7mA ≤ I
in
≤ 5mA
Output voltage Low: 0V ≤ V
out
≤ 2V
High: (V
S
– 2V) ≤ V
out
≤ V
S
; I
out
≤ 100mA
Electrical safety According to IEC 61010-1 (ed.3)
Housing Base part: Aluminum die cast
Optics cover: Polycarbonate with scratch-resistant coating
Housing color Yellow
Enclosure rating IP67 (IEC60529:1989+AMD1:1999+AMD2:2013), only valid with
closed “Aux interface” plastic cover
Protection class III (IEC61140:2016-1)
Weight 250g without connecting cables
Dimensions (L x W x H) 60mmx 60mmx 86mm
Contamination Contamination level 1, EN 61010-1 outside housing
Contamination level 3, EN 61010-1 outside housing, with sealed
USB connection
(All specifications regarding contamination do not apply to the
optics)
11.3 Safety-related parameters
Variant TiM361S
Category B (EN ISO 13849-1:2015)
Performance level PL b (ENISO13849-1:2015)
MTTF
D
(mean time to dan‐
gerous failure)
100years at 25°C ambient temperature (EN ISO 13849-1:2015)
1)
T
M
(mission time) 20years (EN ISO 13849-1:2015)
Conformities EN ISO 13849-1:2015, EN ISO 13482:2014,
EN ISO 13855:2010, ANSI/ITSDF B 56.5:2012
Safety-related detection
range
0.05m ... 4m; for 5% remission
Safety-related detection
capability
Up to a relative speed of 3.2m/s (max. speed of object = 1.6m/s
and max. speed of sensor = 1.6m/s) and at min. 5% remission:
Objects 40mm in diameter at a distance of 0.05m up to max.
1m
Objects 50mm in diameter at a distance of 0.05m up to max.
1.5m
Objects 70mm in diameter at a distance of 0.05m up to max.
2m
Objects 200mm in diameter at a distance of 0.05m up to max.
4m
Blind zone No objects are detected across the entire radial visual range
(scanning range of 270°) from the measurement origin up to a
distance of 0.05m
Response time
3)
Max. 2 scans: 134ms
4)
Protective field/Field eval‐
uation
1 analysis case with 1 field set and up to 3independent protective
fields, signaling of object detections in the protective fields via a
combination of 3PNP switching outputs (OUT1…OUT3)
11 TECHNICAL DATA
58
O P E R A T I N G I N S T R U C T I O N S | TiM361S 8022483/1LM2/2024-03-27 | SICK
Subject to change without notice