SICK TiM361S

à
“Ethernet” connection, 4-pin M12 female connector: not used
á
Area in which no reflective surfaces are permitted when the device is mounted
â
Bearing marking to support alignment (90° axis)
ã
270° aperture angle (field of vision)
ä
Internal reference target
å
Measurement origin
æ
2 x countersunk screw (Torx TX 6) M2 x 4 mm
3.6 Accessories
The following accessories are permissible for safety-related use in connection with the
TiM361S.
3.6.1 Mounting kit
The mounting kit with fine adjustment (part number 2086761) acts as a bracket,
including the option of performing fine adjustment of the scan level, and also provides
impact protection. The device can also be mounted directly on the bracket without the
adapter plate (mechanical collision protection only).
3.6.2 Cables
Designation Part number
USB – Guide for configuring the sensor 6036106
M12 female connector – open, 5m, 12-wire, shielded, PUR, halo‐
gen-free
6054974
M12 female connector – open, 10m, 12-wire, shielded, PUR,
halogen-free
6054973
M12 female connector – open, 20m, 12-wire, shielded, PUR,
halogen-free
6054972
3.6.3 Wire assignment, part numbers 6054974
Female connector, M12, 12-pin,
A-coded (view from front)
Illustration may differ
PIN Signal Function Cable wire colors
6054974 (5m)
1 GND Ground Blue
2 DC9V…28V Supply voltage Brown
3 IN 1 Digital input 1 (field set selection) Red
4 IN 2 Digital input 2 (field set selection) Green
5 OUT 1 Digital output 1 (object detection) Pink
6 OUT 2 Digital output 2 (object detection) Yellow
7 OUT 3 Digital output 3 (object detection) Black
8 OUT 4 Digital output 4 (index/error) Gray
9 PNP:
INGND
PNP:
Common ground for all inputs
White
PRODUCT DESCRIPTION 3
8022483/1LM2/2024-03-27 | SICK O P E R A T I N G I N S T R U C T I O N S | TiM361S
15
Subject to change without notice