SICK TiM361S

11 Technical data
NOTE
The relevant online product page for your product, including technical data, dimensional
drawing, and connection diagrams, can be downloaded, saved, and printed from the
Internet.
The product page can be accessed via the SICK ProductID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).
Please note: This documentation may contain further technical data.
11.1 Features
Variant TiM361S
Measurement principle HDDM (lower statistical error)
Application Indoor
Light source Infrared (wavelength 850nm, max. pulse power 880mW, max.
pulse width 5ns, pulse frequency 1,500kHz)
Laser class 1(IEC60825-1:2014, EN60825-1:2014+A11:2021)
Complies with 21 CFR 1040.10 and 1040.11 except for conform‐
ance with IEC 60825-1 Ed.3., as described in Laser Notice No.56
dated 8May2019.
Aperture angle 270° (horizontal)
Scan field flatness
1)
±1.5°
Scanning frequency 15Hz
Angular resolution 0.33°
Workspace 0.05m... 10m
Safety-related working
range
0.05m... 4m (at 5% remission)
Blind zone 0.00m... 0.05m
Sensing range for 10%
remission
8m (typical)
2)
Minimum physical object
sizes (cross-section)
169mm at a distance of 8m
88mm at a distance of 4m
47mm at a distance of 2m
At respective radiance factor
Distance resolution 1mm
Spot size Spot size on the optics cover: 7mm
Divergence: 8.6mrad (0.49°)
Number of echoes evalu‐
ated
1
1)
Reference area for base of housing
2)
at ambient temperature < -15°C: typ. 7.5m
11.2 Mechanics/electronics
Variant TiM361S
Electrical connection 1 x voltage supply connection, 12-pin M12 male connector
1 x micro USB female connector, type B
Supply voltage 9VDC... 28VDC, SELV and PELV according to IEC60364-4-41
TECHNICAL DATA 11
8022483/1LM2/2024-03-27 | SICK O P E R A T I N G I N S T R U C T I O N S | TiM361S
57
Subject to change without notice