2. Parameterize the device, load parameters into or from the device, or monitor
parameter values.
NOTE
The parameter values then also remain in the project after you close the device win‐
dow.
After closing the main window, you will be informed that parameters must be perma‐
nently saved in the device and parameter values will be lost if the project has not been
saved.
6.5.3 Passwords
Software access to the device is protected by various passwords. After configuring the
device successfully, the respective password must be changed so that it can fulfill its
protective function.
NOTE
Software access to the device is protected by user levels and passwords. After success‐
fully configuring the device, you should change the passwords so they can fulfill their
protective function.
User level Password
Machine operator –
Maintenance Does not have a factory-set password.
To log in as the Maintenance user, a password
must first be created by the Authorized client
user. When creating the password, the Current
password field must be left blank.
Authorized Client (Integrator) The password SICKSAFE is set at the factory.
Change this password to protect the device
against unauthorized access.
Service The password servicelevel is set at the
factory. Change this password to protect the
device against unauthorized access.
Table 1: User level and authorization
Machine operator A Machine operator level user can view the basic device parameters.
•
No password required
•
Read only permissions
•
Not all parameters are visible
Maintenance Maintenance can view the application-related device parameters.
•
Read only permissions
•
Not all parameters are visible
•
Can change the password for this user level
Authorized Client (Inte‐
grator)
Device parameters can be set as an Authorized Client.
•
Access to most parameters
•
Can change the password for this user level and the password for
the Maintenance user level.
•
Can create a diagnostic report
COMMISSIONING AND CONFIGURATION 6
8022483/1LM2/2024-03-27 | SICK O P E R A T I N G I N S T R U C T I O N S | TiM361S
27
Subject to change without notice
To Next Page
Loading...
