SICK TiM361S

Service A Service level user can configure all device parameters.
•
Access to all parameters
•
Can change the password for this user level as well as the password
for the user levels Maintenance and Authorized Client
•
Can create a diagnostic report
•
Can perform firmware updates
NOTE
Change the passwords during initial commissioning to protect your device.
A higher user level can change the password of a lower user level.
NOTE
If the password for the Service user level has been lost: see "Resetting the password for
the Service user level", page 28.
6.5.3.1 Resetting the password for the Service user level
If you have forgotten the password of the Service user level, you can reset it with the
assistance of SICK.
NOTE
The responsible SICK sales company or the responsible SICK service partner carefully
checks each code request to reset the password. A risk of deception by third parties
nevertheless exists. The operating entity should therefore take suitable security meas‐
ures.
The operating entity should also take suitable measures to limit, as best as possible,
access to the product. This includes, in particular, physical access as well as access to
the software interfaces of the product.
Requesting an unlock code
1. Open SOPASET.
2. Open the device window.
3. Open the device name > Password > Reset Service password.
✓
The Reset password window appears.
4. Enter the relevant data.
NOTE Do not press Generate if an unlock code has already been requested
from SICK. Only press this button if a new device code is required when inquiring
again.
5. Click Generate e-mail with data.
✓
Your SICK subsidiary will create the unlock code based on the information pro‐
vided and send it to you.
The code is only valid once for the reset process. You can close the window by
clicking on the x without interrupting the reset process. If you select Cancel or
enter an incorrect code several times, the current reset process is terminated. The
requested code is no longer valid. The process must be restarted.
6. Wait for the unlock code: The dialog box can be closed and the device switched
off.
Entering the unlock code
Prerequisite
•
SICK has sent an unlock code.
1. Open SOPASET.
2. Open the device window.
6 COMMISSIONING AND CONFIGURATION
28
O P E R A T I N G I N S T R U C T I O N S | TiM361S 8022483/1LM2/2024-03-27 | SICK
Subject to change without notice