•
Reflection-related measurement error
•
Ground clearance of the device on the vehicle
•
Braking force of the vehicle
•
Parameters specified based on the application
Height of the scan plane
WARNING
Ineffectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of
non-observance.
•
Always mount the device so that the maximum scan plane height is 200mm.
8 PROJECT PLANNING
54
O P E R A T I N G I N S T R U C T I O N S | TiM361S 8022483/1LM2/2024-03-27 | SICK
Subject to change without notice
To Next Page
Loading...
