Siemens Acuson S3000 User Manual

9 eSieFusion Imaging
Instructions for Use 9 - 13
To
Do this
Apply predefined optimization
settings to the displayed
reference data
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the optimization setting.
● Rotate [Preset].
○ For systems without a touch screen, select a Presets setting on the image
menu.
Note: CTA is a computed tomography angiogram. T1 and T2 are types of
magnetic resonance imaging (MRI) scans.
Adjust the range of values
displayed in the reference data
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the value range setting.
● Drag the Window and Level icon on the touch screen to adjust the setting.
○ For systems without a touch screen, select a Window setting on the image
menu.
Adjust the midpoint of values
displayed in the reference data
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the value setting.
● Drag the Window and Level icon on the touch screen to adjust the setting.
○ For systems without a touch screen, select a Level setting on the image
menu.
Adjust the opacity of the
displayed reference data
(Available only when a blended image is displayed)
 Select an opacity setting.
● Rotate [Transparency].
○ For systems without a touch screen, select a Transparency setting on the
image menu.
The following transparency settings are available when a blended image is
displayed.
0% - The reference data is not visible.
Less than 50% - More of the ultrasound image and less of the reference data is
visible.
50% - Both the ultrasound image and the reference data are equally visible.
More than 50% - More of the reference data and less of ultrasound image is
visible.
100% - The reference data is fully visible and the ultrasound image is less
visible.

Siemens Acuson S3000 Specifications

General

Brand	Siemens
Model	Acuson S3000
Category	Other
Language	English