Siemens CPU 948 User Manual

Parameters 1. ACCU-1-LL
Number of the block to be copied.
The following block numbers are possible:
Block type Block number
DB (OB 255)
DX (OB 254)
3 to 255
3 to 255
2. ACCU-1-LH
ACCU-1-LH must be zero.
Duplicating
Function
A data block is duplicated within the user memory and it is assigned a
different block number. The start address of the new data block is
entered in the address list in DB 0. The start address of the old block is
retained, i.e. the original data block remains valid.
The start address is entered in DB 0 only after the transfer is
completed and all the IDs are correctly entered in the block header.
The duplicated block is therefore only declared valid or existent by the
system program after it has been completely transferred.
Parameters 1. ACCU-1-LL
Number of the block to be duplicated (source).
2. ACCU-1-LH
Number of the new block (destination).
The following block numbers are possible:
Block type Block number
DB (OB 255)
DX (OB 254)
3 to 255
3 to 255
OB 254/255: Copy/Duplicate Data Blocks
CPU 948 Programming Guide
6 - 66 C79000-G8576-C848-04

Siemens CPU 948 Specifications

General

Brand	Siemens
Model	CPU 948
Category	Controller
Language	English