Siemens CPU 948 - INITIALIZE Function (OB 200)

10.4 INITIALIZE Function (OB 200)
10.4.1
Function To transfer data from one CPU to another CPU, the data must be
temporarily buffered. The INITIALIZE function sets up a buffer on
the COR 923C coordinator.
The memory is initialized in fields with a fixed length of 32 words.
Each memory field accepts one data field with a length between 1 data
word and 32 data words. A data field is entered in a memory field by a
SEND function and read out by a RECEIVE function.
If you are using two CPUs, there are two links (transfer directions,
"channels"):
If you are using three CPUs, there are six links:
CPU 1 CPU 2
CPU 2
CPU 3
CPU 1
INITIALIZE Function (OB 200)
CPU 948 Programming Guide
C79000-G8576-C848-04
10 - 33