Programming Manual of FC2005/FC901
A6V10333724_b_en_-- 39|63
or not.
Status Self
Restoring
Set if the status events can be removed from
event list after it disappears. If it is set as False,
a Status Restoral event will be created and
appended in event list on the event disappears.
If it is set as True, the status even can be
disappeared on the signal is out.
{True;False;} True -
Log Status Set whether to log Status events on FACP. {True;False;} True -
Steps:
1. Press “Menu” to display the main menu (Fig. 22-1).
2. Press “→” to select “Oper” submenu (Fig.22-2). Press “↓” to
select "Parameter" and then press “OK”. All editable parameters
are listed (Fig.22-3).
3. Press “↓” to select a timer which needs to be set (i.e., “Reset
Inhibit Time”). Press “OK”, the current setting is displayed (Fig.
22-4).
4. Enter a new setting, Press “OK”. The setting is finished and
system returns to the previous screen.
Fig.22-1
Fig.22-2
Fig.22-3
Fig.22-4
To Next Page
Loading...
