Siemens FC2005 Programming Manual

Programming Manual of FC2005/FC901
38|63 A6V10333724_b_en_--
19. HOW TO SET SYSTEM TIMER
Function: This option allows the user to set the following system timer parameters:
Timer Description Value Scope Default Min.
Step
Reset Inhibit
Time
Sets the time the user is prevented form
resetting the system after alarm annunciation.
{min:0;max:6;} 0 1min
Trouble/supervis
ory Remind Time
Sets the time interval at which
trouble/supervisory events are re-annunciated if
these events were previously acknowledged. 0
means close this function.
{min:0;max:30;} 24 1h
AC Fail Delay
Sets the delay time to submit the "AC fail"
trouble event to remote output (DACT, On-board
common trouble relay output, City tie output)
{min:1;max:24;} 24 1h
Auto Silence On
Set the auto silence timer on or off. If the timer is
on, all the silenceable output will be silenced
after the "Auto Silence Time" is expired. If the
timer is off, the auto silence timer is not worked.
{True;False;} True -
Auto Silence
Time
Sets the time the silenceable output will
automatically silence itself after alarm sounding.
{min:5;max:30;} 30 1min
Silence Inhibit
Time
Sets the time within which the silenceable output
must be activated.
{min:0;max:240;} 0 1s
Login Time
Sets the time no operation occurs before FACP
exits to level 1.
{min:1;max:30;} 1 1min
LCD ShutDown
Time
Sets the time no operation or event occurs
before LCD turns off its back light. 0 means
never shut down LCD.
{min:0;max:60;} 60 1min
Supervisory
Latching
Set if the supervisory event is latched. If it's
latched, the supervisory event can be restored
only when system is reset. If it's not latched, the
supervisory event can be disappeared as soon
as the signal is out.
{True;False;} False -
SUP Self
Restoring
Set if the supervisory events can be removed
from event list after it disappears. If it is set as
False, a Supervisory Restoral event will be
created and appended in event list on the event
disappears. If it is set as True, the supervisory
even can be disappeared on the signal is out.
{True;False;} True -
Trouble Self
Restoring
Set if the trouble events can be removed from
event list after it disappears. If it is set as False,
a Trouble Restoral event will be created and
appended in event list on the event disappears.
If it is set as True, the trouble even can be
disappeared on the signal is out.
{True;False;} True -
Display Status Set whether to display Status events on FACP {True;False;} True -

Siemens FC2005 Specifications

General

Brand	Siemens
Model	FC2005
Category	Control Panel
Language	English