Configuring and commissioning using ETS
8.4 General parameter assignments
CMK2000
42 Operating Instructions, 11/2015, A5E34877550B/001
Note
Guideline for setting the update rate
•
If the cycle time of the LOGO! is overloaded due to a high level of data exchange (high
update rate), a larger value must be used for the update rate, e.g. 200 ms.
If the response time for LOGO →
KNX is too slow, e.g. for switching lights, a smaller value
must be selected for the update rate, e.g. 50 ms.
The update rate can be set as follows:
● 50 ms
● 100 ms
● 150 ms (default)
● 200 ms
● 300 ms
Own IP address and subnet mask
In these fields you enter the IP address and subnet mask of the CMK2000.
Example of private Class C network:
IP address 192.168.0.1 192.168.0.10
Password for web interface
It is necessary to enter a password to access the CMK2000 from a PC (using web browser).
You define the password here.
The default password is "Admin"
• Immediately change the default password to a new one.
• Protect access to the web server by using a "strong" password. "Strong" passwords are
at least eight characters long, consist of letters, numbers and special characters, are not
words which can be found in a dictionary, and are not names or identifiers which can be
derived from personal data. Keep the password secret and change it frequently.
To Next Page
Loading...
