AT command interface
Version 8 dated 15.03.00 139
Siemens Information and Communication Products
A
5.9 Summary of CME - CMS Errors
Final result code +CMS ERROR: <err> indicates an error related to mobile equipment or network. The operation is si-
milar to ERROR result code. None of the following commands in the same command line is executed. Neither ERROR
nor OK result code are returned.
<err> values used by common messaging commands:
5.9.1 Summary of CMS ERRORS related to V.25ter commands
5.9.2 Summary of CME ERRORS related to GSM 07.07
Code of <err> Meaning
0...127 GSM 04.11 Annex E-2 values, see CMS ERROR codes related GSM 07.07
128...255 GSM 03.40 subclause 9.2.3.22 values
512... see CMS ERROR codes related to Siemens-defined commands
Code of <err> Meaning
0 phone failure
1 no connection to phone
2 phone-adapter link reserved
3 operation not allowed
4 operation not supported
5 PH-SIM PIN required
6 PH-FSIM PIN required
7 PH-FSIM PUK required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure
14 SIM busy
15 SIM wrong
16 incorrect password
17 SIM PIN2 required
18 SIM PUK2 required
20 memory full
21 invalid index
22 not found
23 memory failure
24 text string too long
25 invalid characters in text string
26 dial string too long
27 invalid characters in dial string
30 no network service
31 network timeout
32 network not allowed – emergency calls only
40 network personalization PIN required
41 network personalization PUK required
42 network subset personalization PIN required
To Next Page
Loading...
Need help?
General