Man Machine Interface
Version 8 dated 15.03.00 152
Siemens Information and Communication Products
A
6.5.14 Deleting an SMS message
A displayed message is deleted by holding down the SMS key until an acoustic signal indicating the deletion is heard. The
next message is displayed. If there are no more messages saved, the original display appears and the message indicator is
deleted.
Deleting a message
6.5.15 SMS message overflow
The messages indicator flashes if there is no space for an incoming message in the SIM memory. Incoming messages are
temporarily stored in the PLMN.
SMS overflow
6.5.16 Service indicator
The call processing status M20 is shown on the display when the telephone is idle.
Table 6-9 Service indicator display
Event Display text: 1
st
line
Display text: 2
nd
line
<SMS> [Message 1]
[Message 1]
hold down
<SMS>
[Message 2]
[Message 2]
Message 1 is deleted, next displayed
hold down
<SMS>
[last message]
[last message]
Last message deleted
[original display]
Event Display text: 1
st
line
Display text: 2
nd
line
SMS message [Idle display] M A flashing M icon on the right-hand side of the dis-
play is visible in all call processing statuses
Event Display - Text: 1
st
line
Display - Text: 2
nd
line
Remark
SIM not inserted Insert SIM
SIM inserted: searching
or no valid PLMN
Searching
Network
Power-on, no valid PLMN signal received,
SIM inserted
PIN input
(dialling keys)
Enter Pin:
****
PIN entry shown as ‘*’
PLMN signal [Network operator] Idle display
To Next Page
Loading...
Need help?
General