Siemens M20 Terminal User Manual

Man Machine Interface
Version 8 dated 15.03.00 144
Siemens Information and Communication Products
A
The following user defined settings or queries are activated or configured with M20-specific MMI codes:
Table 6-3 M20-specific MMI codes
Table 6-4 Languages for display text
Table 6-5 Value ranges
Note
:
1
) unspecified values are set to the default value.
The availability of user-defined settings via Basic MMI is set by the SIM card. Normally, it is not possible to activate or
deactivate call forwarding or CLIR, etc., for example, with SIM cards in the lower price range.
The following user-defined settings or queries are activated or configured using Basic MMI codes (in accordance with
ETS 300-511):
• Network call barring: setting the connection type
• Call forwarding
• Calling line identification restriction CLIR (on/off)
Feature Code
Network selection list *01763*11#
Language for display texts *01763*12*language#
Timeout for automatic signal transmission *01763*14*timeout#
Local call barring – off *01763*20#
Local call barring – bar incoming on *01763*211#
Local call barring – bar incoming off *01763*210#
Local call barring – bar outgoing on *01763*221#
Local call barring – bar outgoing on *01763*220#
Setting the proceed-to-select tone *01763*41*tone#
Setting the ringer tone *01763*42*ringertone#
Setting the ringer volume *01763*43*ringervolume#
Setting the speaker volume *01763*44*speakervolume#
Language Language
1 English
2 German
3 French
4 Portuguese
5 Spanish
Value Range
1)
default Remark
timeout 5-20 5 in seconds
tone 1-2 2 different tone sequences
ringertone 0-6 1 different tone sequences
ringervolume 0-7 4 0...ringer deactivated, 1...low, 7...loud
speakervolume 0-7 4 0...low, 7...loud

Siemens M20 Terminal Specifications

General

Brand	Siemens
Model	M20 Terminal
Category	Engine
Language	English