Application notes
Version 8 dated 15.03.00 165
Siemens Information and Communication Products
A
8.2.7.2 Read phonebook entry
8.2.7.3 Select phonebook memory storage
8.2.7.4 Write phonebook entry
OK
NOTE
: it is useful to check which book is used before reading
(see:1.4)
at+cpbr=?
+CPBR: (0-2),40, 30 (ON is selected) index: 0-2;
length of no.: 40; length of name: 30
OK
NOTE
: the number of phone numbers that can be stored depends
on your SIM card
+CPBR: (0-125),40,30 if SM phonebook is selected
+CPBR: (0-5),40,30 ...FD...
+CPBR: (0-8),40,30 ...LD...
at+cpbr=number1[,number2] reads the entries of the current phonebook entries stored between
number 1 and number 2
You can only read the entry in position number 1 if you do not
enter number 2
+CPBR: 61,...
+CPBR: 62,
”+436642254766”,145,”Susanne”
+CPBR: 63,”01170735397”,129,””
+CPBR: 64,...
The international number for Susanne is stored (SM selected) in
position 62 of this memory
This is a national number, no name has been entered
OK
at+cpbs=? Ask for list of supported storages
+CPBS:
("SM","FD","LD","R
C","ON","ME","MC",
"MT")
List of supported storages
OK
at+cpbs="SM" Select SIM phonebook
OK
at+cpbs="FD" Select SIM fixdialling-phonebook
OK
at+cpbs="ON" Select SIM (or ME) own numbers (MSISSDNs) list
OK
at+cpbs? Ask for current selected phonebook memory
+CPBS: "ON" Current select is ”ON”
OK
at+cpbw=? Ask for location range supported by the current storage
To Next Page
Loading...
