Siemens MAG 1100 - Page 11

11
SITRANS F M MAGFLO

DKFD.PS.027.W3.02
2. Technical data
Technical data
Flanges Standard DN 15-50: PN 40 DN 25-50: PN 40
EN 1092-1:2001
1
) DN 65-150: PN 16 DN 65-150: PN 16
Rased face DN 200-1000: PN 10 DN 200-1200: PN 10
DN 1100 -2000: PN 6
Option DN 65-1000: PN 6 DN 200-600: PN 16
DN 1200-2000: PN 10
DN 200-2000: PN 16
DN 200-600: PN 25
DN 65-600: PN 40
DN 50-400 PN 63
DN 25-350 PN 100
ANSI B 16.5 3/4"-24": Class 150 (20 bar) 3/4"-24": Class 150 (20 bar)
(∼BS 1560) 3/4"-24": Class 300 (50 bar)
AS 2129 3/4"-48": Table D/E
AS 4087 Class 14 (DN 50 - 1200, 14 bar)
Class 21 (DN 50 - 600, 21 bar)
Class 35 (DN 50 - 600, 35 bar)
AWWA C-207 28"-78": Class D (10 bar) 28"-48": Class D (10 bar)
Electrodes Standard AISI 316 Ti (1.4571) AISI 316 Ti (1.4571)
Option Hastelloy C-276, Platinum / Iridium, Titanium,
AISI 316 Ti Ceramic Coated, Tantalum
PE - electrodes
Standard As measuring electrodes (except PTFE) AISI 316 Ti (1.4571)
Measuring pipe Standard AISI 304 (1.4301) AISI 304 (1.4301)
Option AISI 316 L (1.4404)
Flange and Standard Carbon steel Carbon steel
housing material Corrosion-resistant two-component coating (min. 150 µm) Corrosion-resistant two-compo-
nent coating (min. 150 µm)
Option AISI 304 (1.4301) flanges and carbon steel housing. Coating as above
Option AISI 316 L (1.4404) flanges and housing
Ex-approval Remote DN 15-25 EEx ia/ib IIB T4-T6
DN 40-300 EEx ia/ib IIB T4-T6
DN 350-2000 EEx e ia IIC T3-T6
Compact DN 15-300 EEx de [ia/ib] IIB T4-T6
MAG 3000 Ex-d
Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX
2.3 Sensor MAG 3100, MAG 3100 Ex and MAG 3100 W (continued)
MAG 3100 MAG 3100 Ex / Ex-d MAG 3100 W
MAG 3100, MAG 3100 Ex and MAG 3100 W
1
) EN 1092-1, DIN 2501 & BS 4504 have the same mating dimensions