4
SITRANS F M MAGFLO
DKFD.PS.027.W3.02
All SITRANS F M MAGFLO
electromagnetic flowmeters feature a unique SENSORPROM
®
memory unit which stores sensor calibration data and signal converter settings for the lifetime of
the product.
At commissioning the flowmeter commences measurement without any initial programming.
1.1
Product introduction
1. Product introduction
SITRANS F M MAGFLO
electromagnetic flowmeters offer reliable, precise and inexpensive
flow measurement on all electrically conductive liquids. Typical applications are found in all
industries. E.g.:
• Water sector: Potable water, treatment of chemicals, waste water and sludge.
• Food sector: Dairy products, beer, wine, soft-drinks and fruit juices.
• Chemical sector: Detergents, pharmaceuticals, acids and alkalies.
• Other sectors: District heating, paper pulp and mining slurries.
SITRANS F M MAGFLO
electromagnetic flowmeters are characterised by simplicity:
⇒ Simple to install
⇒ Simple to commission
⇒ Simple to operate
⇒ Simple to maintain
SITRANS F M MAGFLO
electromagnetic flowmeters are manufactured by Siemens Flow
Instruments A/S - one of the worlds leading makers of flowmeters.
The factory settings matching the sensor are stored
in the SENSORPROM
®
unit. Also customer specified
settings are downloaded to the SENSORPROM
®
unit. Should the signal converter be replaced, the
new converter will upload all previous settings and
resume measurement without any need for re-
programming.
Furthermore, the "fingerprint" used in connection
with the Siemens Flow Instruments Verificator is
stored during the sensor calibration.
USM II "Plug & Play" add-on communication
modules.
USM II - the Universal Signal Module with "Plug &
Play" simplicity makes it easy to access and integrate
the flow measurement with almost any system. It
ensures the flowmeter will be easy to upgrade to new
communication platforms in the future, too.
To Next Page
Loading...
