MAG 3100 high temperature PTFE
Flange PN 6 PN 10 PN 16 PN 25 PN 40 150 lb 300 lb
mm
15 N/A N/A N/A N/A SEP SEP SEP
25 N/A N/A N/A N/A SEP SEP SEP
40 N/A N/A N/A N/A PED LVD PED*
50 N/A N/A N/A N/A PED PED* PED*
65 LVD N/A PED N/A PED PED* PED*
80 LVD N/A PED N/A PED PED* PED*
100 LVD N/A PED N/A PED PED* PED*
125 PED N/A PED N/A PED PED* PED*
150 PED N/A PED N/A PED PED* PED*
200 PED PED PED PED PED PED* PED*
250 PED PED PED PED PED PED* PED*
300 PED PED PED PED PED PED* PED*
350 PED PED PED PED PED PED* PED*
400 PED PED PED PED PED PED* N/A
450 PED PED PED PED PED PED* N/A
500 PED PED PED PED PED PED* N/A
600 PED PED PED PED PED*
1. Product introduction
MAG 1100
Flange Ceramic Ceramic Ceramic Ceramic Ceramic PFA PFA PFA
mm 150° 200° Ex Ex-d FOOD Ex FOOD
6 SEP N/A SEP SEP N/A N/A N/A N/A
10 SEP N/A SEP SEP SEP SEP SEP SEP
15 SEP SEP SEP SEP SEP SEP SEP SEP
25 SEP SEP SEP SEP SEP SEP SEP SEP
40 PED PED PED PED PED LVD LVD LVD
50 PED PED PED PED PED PED PED PED
65 PED N/A PED PED PED PED PED PED
80 PED PED PED PED PED PED PED PED
100 PED PED PED PED PED PED PED PED
The key to the above tables is as follows.
PED Product covered by PED and only available as fully PED conforming
PED* Product covered by PED but available as either conforming or non conforming to PED
SEP Excluded from PED under Sound Engineering Practice
LVD Excluded from PED under the Low Voltage Directive
1.3.1
Exclusions
All products sold outside of EU and EFTA are excluded from the directive, also products sold into
certain market sectors are also excluded. These include
1) Meters used in networks for the supply, distribution and discharge of water.
2) Meters used in pipelines for the conveyance of any fluid from offshore to onshore.
3) Meters used in the extraction of petroleum or gas, including christmas tree and manifold
equipment.
4) Any meter mounted on a ship or mobile offshore platform.
1.3.2
Product marking
All meters will now carry either a CE mark or a CE mark followed by 0086
CE
0086: This indicates that the product conforms to PED 97/23/EC, LVD 73/23/EEC + Amendment
93/68/EEC & EMC 89/336 EEC
CE: This indicates that the product conforms to LVD 73/23/EEC + Amendment 93/68/EEC &
EMC 89/336 EEC