46
SITRANS F M MAGFLO
DKFD.PS.027.W3.02
6. Installation of signal converter
Installation of signal conv.
6.2.6
Installation in IP 65 wall
mounting enclosure
1. Mount the IP 65 enclosure on the wall with four screws.
2. Mount the SENSORPROM
®
memory unit on the connection board as shown.
The SENSORPROM
®
unit is supplied with the sensor in the terminal box. The connection board
for IP 65 wall mounting boxes must be used.
3. Connect the cables to the terminals, see "Electrical connection", chapter 7.
4. Insert the signal converter and close the cover.
To Next Page
Loading...
