8 DKFD.PS.027.W3.02
2. Technical data
Technical data
SITRANS F M MAGFLO
Type Flangeless sensor (Sandwich design)
Nominal size
mm
DN 6, 10, 15, 25, 40, 50, 65, 80, 100 DN 10, 15, 25, 40, 50, 65, 80, 100 DN 6, 10, 15, 25, 40, 50, 65, 80, 100
Operating pressure DN 6-65: 40 bar, DN 80: 37.5 bar, DN 6-65: 40 bar, DN 80: 37.5 bar,
DN 100: 30 bar 20 bar DN 100: 30 bar
Vacuum: 1 × 10
-6
bar Vacuum: 0.02 bar Vacuum: 1 × 10
-6
bar
Temperature of medium
PFA
−30°C to +130°C
Ceramic
−20°C to +150°C −20°C to +120°C
High temp.
−20°C to +200°C Suitable for steam sterilization at 150°C
Temperature shock (Duration > 1 min.): Max. ±100°C momentarily (Duration > 1 min.):
(Ceramic liner) DN 6, 10, 15, 25: DN 6, 10, 15, 25:
Max. ∆T ≤ 15°C/min. Max. ∆T ≤ 15°C/min.
DN 40, 50, 65: Max. ∆T ≤ 10°C/min. DN 40, 50, 65: Max. ∆T ≤ 10°C/min.
DN 80, 100: Max. ∆T ≤ 5°C/min. DN 80, 100: Max. ∆T ≤ 5°C/min.
(Duration ≤ 1 min., (Duration ≤ 1 min.,
followed by 10 min. rest): followed by 10 min. rest):
DN 6, 10, 15, 25: Max. ∆T ≤ 80°C DN 6, 10, 15, 25: Max. ∆T ≤ 80°C
DN 40, 50, 65: Max. ∆T ≤ 70°C DN 40, 50, 65: Max. ∆T ≤ 70°C
DN 80, 100: Max. ∆T ≤ 60°C DN 80, 100: Max. ∆T ≤ 60°C
Ambient temperature Remote signal converter: −40°C to +100°C
Compact signal converter: −20°C to +50°C
Liner Aluminium oxide Al
2
O
3
(ceramics) Reinforced PFA (Teflon) Aluminium oxide Al
2
O
3
(ceramics)
Electrodes Platinum with gold/titanium brazing Hastelloy C-276 Platinum with gold/titanium brazing
alloy alloy
Enclosure Stainless steel AISI 316 L (1.4404) Stainless steel AISI 316 (1.4404) Stainless steel AISI 316 L (1.4404)
Terminal box
Standard
Fibre glass-reinforced polyamide Fibre glass-reinforced polyamide Stainless steel AISI 316 (1.4436)
(not compact) High temp.
Stainless steel AISI 316 (1.4436) Stainless steel AISI 316 L (1.4436)
Fixing studs Stainless steel AISI 304 (1.4301) Stainless steel AISI 304 (1.4301)
Number and size to EN 1092-1:2001 Number and size to EN 1092-1:2001
Mating flanges EN 1092-1:2001, ANSI B16.5
class 150 and 300 or equivalent
EN 1092-1:2001, ANSI B16.5
class 150 and 300 or equivalent
Option
DN 6/10: ½" pipe connection adapters thread: ½" tappered ISO 7-1
Gaskets
Standard
EPDM (max. 150°C, PN 40) EPDM (max. 150°C, PN 40)
Option
Graphite (max. 200°C, PN 40) Graphite (max. 200°C, PN 40)
Option
PTFE (max. 130°C, PN 25) PTFE (max. 130°C, PN 25)
Cable entries 4 Pg 13.5
Enclosure rating
Standard
IP 67 to EN 60529 (NEMA 4x) (1 m w.g for 30 min.)
Option
IP 68 to EN 60529 (NEMA 6) (10 m w.g. cont.)
Mechanical load (vibration) 18-1000 Hz random, 3.17 G rms in all directions to EN 60068-2-36 18-1000 Hz random in all directions
to EN 60068-2-36
Sensor: 3.17 G/Compact Ex-d: 1.14 G
Test pressure 80 bar (2 × PN) 40 bar (2 × PN) 80 bar (2 × PN)
Approvals 3A EEx ia/ib IIB T4-T6/
DEMKO, No. 97D.121909X
EEx de [ia/ib] IIB T4-T6/
DEMKO 94C.115327X
Excitation frequency DN 6-65: 12.5 Hz DN 10-65: 12.5 Hz DN 6-65: 6.25 Hz
DN 80-100: 6.25 Hz DN 80-100: 6.25 Hz DN 80-100: 3.125 Hz
Conforms to PED, LVT, EMC PED - 97/23EC, LVD - 73/23 EEC + amendment 93/68/EEC, EMC - 89/336 EEX
2. Technical data
2.1 Sensor MAG 1100 and MAG 1100 Ex
MAG 1100
MAG 1100 PFA
MAG 1100 Ex & Ex-d
MAG 1100 and MAG 1100 Ex
To Next Page
Loading...
