SITRANS F M MAGFLO
DKFD.PS.027.W3.02
6. Installation of signal converter
Installation of signal conv.
45
Locate the add-on module in the bottom of the
MAG 6000 signal converter.
6.2.5
Add-on modules
MAG 6000 only
Press the add-on module forwards as far as
possible.
The add-on module has now been installed
and the signal converter is ready to be installed
on the terminal box.
Communication to the operator menu and
electrically inputs and outputs is automati-cally
established by power on.
To Next Page
Loading...
