Siemens MAG 1100 - Calibration

89
SITRANS F M MAGFLO

DKFD.PS.027.W3.02
10. Ordering
Ordering
Description Code No. Code No. Code No. Code No.
DN 3-65 DN 80-150 DN 200-500 DN 600-1200
Standard calibration
Each sensor calibrated twice at two
calibration points
Included in sensor scope of delivery
Matched pair
Sensor and signal converter calibrated
together with standard calibration
Customer specified matched pair
Sensor with signal converter calibrated
in max. 10 customer specified points
Accredited Siemens Flow Instruments
matched pairs
Calibrations acc. to EN 45001
Sealing and labeling instruction must follow
the order
- PTB cold water
- PTB other media than water
- OIML R75 hot water
- OIML R117 other media than water
- OIML R117 cold water
Accredited Delft matched pair
Calibration acc. to EN 45001
Sealing and labeling instruction as above
Wittness inspection
Any of above mentioned calibrations
10.9
Calibration
Initial calibration
Re-calibration
Description Code No. Code No. Code No. Code No.
DN 3-65 DN 80-150 DN 200-500 DN 600-1200
Matched pair
Sensor and signal converter calibrated FDK:085F7302 FDK:085F7303 FDK:085F7304 FDK:085F7305
together with standard calibration
Customer specified matched pair
Sensor with signal converter calibrated FDK:085F7377 FDK:085F7378 FDK:085F7379 FDK:085F7380
in max. 10 customer specified points
Accredited Siemens Flow Instruments
matched pairs
Calibrations acc. to EN 45001
Sealing and labeling instruction must
follow the order
- PTB cold water FDK:085F7387 FDK:085F7388 FDK:085F7389 FDK:085F7390
- PTB other media than water
- OIML R75 hot water
- OIML R117 other media than water
- OIML R117 cold water
Accredited Delft matched pair
Calibration acc. to EN 45001 N/A FDK:085F7393 FDK:085F7394 FDK:085F7395
Sealing and labeling instruction as above
Add-on
Code No.: On application form to be filled
in and sent to SFI-GB