SITRANS F M MAGFLO
DKFD.PS.027.W3.02
6. Installation of signal converter
Installation of signal conv.
43
6.2.3
Remote installation -
Wall mounting
(continued)
Mount the connection plate in the terminal box.
Fix the connection plate with the two diagonal
opposite screws.
Fit the coil, electrode, supply and output cables
respectively and tighten the cable glands to
obtain optimum sealing. Please see the wiring
diagram in chapter 7 for the electrical connec-
tions.
Mount the signal converter on the terminal box.
To Next Page
Loading...
