International English 5 System Parameters
MICROMASTER 440 Operating instructions
6SE6400-5CA00-0BP0
63
Communication (P0004 = 20)
Par. No. Parametername Default Acc WS QC
P0918 CB address 3 2 CT N
P0927 Parameter changeable via 15 2 CUT N
r0964[5] Firmware version data - 3 - -
r0965 Profibus profile - 3 - -
r0967 Control word 1 - 3 - -
r0968 Status word 1 - 3 - -
P0971 Transfer data from RAM to EEPROM 0 3 CUT N
P2000[3] Reference frequency 50.00 2 CT N
P2001[3] Reference voltage 1000 3 CT N
P2002[3] Reference current 0.10 3 CT N
P2003[3] Reference torque 0.75 3 CT N
r2004[3] Reference power - 3 - -
P2009[2] USS normalization 0 3 CT N
P2010[2] USS baudrate 6 2 CUT N
P2011[2] USS address 0 2 CUT N
P2012[2] USS PZD length 2 3 CUT N
P2013[2] USS PKW length 127 3 CUT N
P2014[2] USS telegram off time 0 3 CT N
r2015[8] CO: PZD from BOP link (USS) - 3 - -
P2016[8] CI: PZD to BOP link (USS) 52:0 3 CT N
r2018[8] CO: PZD from COM link (USS) - 3 - -
P2019[8] CI: PZD to COM link (USS) 52:0 3 CT N
r2024[2] USS error-free telegrams - 3 - -
r2025[2] USS rejected telegrams - 3 - -
r2026[2] USS character frame error - 3 - -
r2027[2] USS overrun error - 3 - -
r2028[2] USS parity error - 3 - -
r2029[2] USS start not identified - 3 - -
r2030[2] USS BCC error - 3 - -
r2031[2] USS length error - 3 - -
r2032 BO: CtrlWrd1 from BOP link (USS) - 3 - -
r2033 BO: CtrlWrd2 from BOP link (USS) - 3 - -
r2036 BO: CtrlWrd1 from COM link (USS) - 3 - -
r2037 BO: CtrlWrd2 from COM link (USS) - 3 - -
P2040 CB telegram off time 20 3 CT N
P2041[5] CB parameter 0 3 CT N
r2050[8] CO: PZD from CB - 3 - -
P2051[8] CI: PZD to CB 52:0 3 CT N
r2053[5] CB identification - 3 - -
r2054[7] CB diagnosis - 3 - -
r2090 BO: Control word 1 from CB - 3 - -
r2091 BO: Control word 2 from CB - 3 - -
http://nicontrols.com
To Next Page
Loading...
