Siemens MicroSAM User Manual

Spare parts/accessories
MicroSAM
102 Operating Instructions, 06/2012, C79000-G5376-C560-07
Item Designation Order No.
100 O-ring set with 2 units each 200x2 and 63x1.5 as
well as 6 units M3x6 threaded pin
A5E00209858
110 Solenoid valve 3/2-way "D" A5E00162568
120 Solenoid valve 3/2-way "C" A5E00105041
250 Swagelok 1/8" screwed gland with safety filter for
sample input, sample output, carrier gas
A5E00198331
260 Swagelok 1/8" screwed gland for gas connection,
with dummy plug
A5E00198046
290 Flow insert, type 1 A5E00146507
300 Flow insert, dummy A5E00177777
310 Flow insert, type 2 A5E00191739
500 Sealing cap 1/8", brass A5E00391322
Item Designation Order No.
130 Pulling tool for analysis module A5E00209905
140 Conical pressure nut, complete A5E00160856
160 Analysis module type A01 A5E00209700
170 Analysis module type A02 A5E00209753
180 Analysis module type A03 A5E00209756
190 Analysis module type A04 A5E00209765
200 Analysis module type A05 A5E00209774
210 Analysis module type A06 A5E00209800
220 Analysis module type A07 A5E00209802
230 Analysis module type A08 A5E00209808
235 Analysis module type A09 A5E00505612
240 Analysis module type A10 A5E00497962
245 Analysis module type A11 A5E00885119
600 Analysis module type D01 A5E02048228
580 RSP service cable A5E00362332
590 MicroSAM basic device without analysis module,
with rating plate and MicroSAM software package
A5E00881520
7.2 Accessories
Item Designation Order No.
151 Set of screwed glands for MicroSAM A5E00399237
152 Carrier gas drying filter (1/8") GWK-CHRTSCP17971
570 Filter support for carrier gas drying filter (1/8") GWK-CHRFICP7988

Siemens MicroSAM Specifications

General

Brand	Siemens
Model	MicroSAM
Category	Measuring Instruments
Language	English