MicroSAM
Operating Instructions, 06/2012, C79000-G5376-C560-07
7
Purpose of this documentation
1
These instructions contain all information that you will require to commission and use the
device.
It is aimed at persons who install the device mechanically, connect it electrically,
parameterize and commission it, as well as at service and maintenance engineers.
Note
Please read the operating instructions before you use this device. The operating
instructions contain all important information for the device.
Observation of the information:
– Guarantees correct device functioning
– Provides reliable results
– Saves you servicing costs
Information
The contents of these instructions are neither part of an earlier existing agreement,
statement or legal commitment nor do they change this. All obligations on the part of
Siemens AG are contained in the respective sales contract which also contains the complete
and solely applicable warranty conditions. Any statements contained herein do not create
new warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make
technical changes in the course of further development.
History
The following table shows the most important changes in the documentation compared to
each previous edition:
Issue Comment Firmware
04
03/2012
Revision of contents and editing FW: 3.10
03
02/2010
Revision of contents and editing FW: 3.00
02
09/2008
Revision of contents and editing FW: 02.08.00
01
08/2006
First edition FW: 01.17.00
To Next Page
Loading...
Need help?
General
