Siemens MOBILETT Plus HP - Page 74

MOBILETT Plus HP SPR8-220.061.03 Page 8 of 8 Siemens AG
Rev. 03 09.03 CS PS 24 Medical Solutions
8 - 8 Miscellaneous
• Disconnect the wires (pos. 1 / Fig. 10) and mark if necessary.
• Replace switch element (pos. 2 / Fig. 10).
Reinstallation is performed in the reverse order.
Fig. 10
Connection to Connection from Color Connection to Connection from Color
S11-2 BATT+ RD S11-15 K201:3 BU
S11-3 K202:3 BU S11-16 Fuse U9 BU
S11-10 K52:3 BK S11-19 K52:1 BU
S11-12
S11-12
K104:1
K202:2
RO
YE
S11-21
S11-21
K104:4
BATT-
BK
BK
S11-13 Fuse U10 BK S11-23 K301-2 BU
S11-14 K201:1 BK S11-24 K301:1 RO
During reinstallation pay special attention to the shelf of the
power transmission and the rail of the cable winder assembly,
which must be under the shelf!
We recommend that you pull out the power transmission unit to
make the reinstallation easier.
MOB00624
2
1
NOTICE