3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
Siemens AG 2019 All rights reserved
17. Select the following entries (1) in the drop down list:
– As a "Group Name", select the group to which the new user should belong.
– As "Authentication Protocol", select the "SHA" entry.
– As "Privacy Protocol", select the "DES" entry.
18. Enter the desired password for the authentication in the "Authentication
Password" (3) entry field and confirm it.
19. Enter the desired password for the encryption in the "Privacy Password" entry
field and confirm it.
20. Click the "Set Values" button (4) to confirm the settings.
Figure 3-3
To Next Page
Loading...
